日托光伏柔性组件简介
2018 11 1 2 3 SPP-Flex 1.0 SPP Flex-1.0 / Flexible / High efficiency / Ultra thin / Light weight / Easy Installation / Attractive design SPP Flex-1.0 / Flexible polymer materials / Encapsulating material GPS / Insulating layer / MWT back contact cells / Conductive layer / Back sheet / Structure / Curtain wall 20 TUV / Steel tile roof Solar airplane, polar / Application 安装要点 1. 将安装面表面清洁干净； 2. 沿纵向打结构胶（固定胶 带）， 宽度6-10mm ，长 度1650mm ，间 距240mm （彩钢 瓦屋顶 沿瓦楞打胶，瓦楞间距 ≤330mm ， 若＞330mm 情 况建议 安装孔 辅助） ； 3. 安装 孔辅助安装（可根据客 户要求 指定孔 距） 安装方式结构胶辅助安装孔 注意事项搬运过程中避免局部点受力 1 r 0.5 m r 0.35 m r 0.25 m r 0.15 m 10 I-V EL Testing I-V and EL after keeping the modules with different radius for 10 minutes / Testing of different bending radius EL 0.15m Micro-cracks occurred when bending radius reaches 0.15 m. / Power output with different bending radius 0.74 The power output declines only about 0.74 because of micro-cracks. Voc Isc Isc Voc With micro-cracks, the short circuit current has no observable change. The open circuit voltage decreases significantly, which is mainly due to the recombination of defects caused by cracks. THANKS
个人主页
